Wiring harness installation on a 2017 Bolt
Wiring Harness Installation Back when we bought Zeus we installed a hitch to add utility to the Bolt. Eventually we wanted to also install a wiring harness so we could tow a small trailer for various errands. Right after I bought the receiver I also purchased a small 5'X8' trailer and a Powered Circuit Protected Tail-light Converter to power the lights on the trailer. I would normally link to the website I purchased this on but it is no longer available. The closest I could find was this: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector which looks very close to the one I installed here but the converter seems a little smaller (newer model?). Anyways here are the steps I took to install the wiring harness: To start remove the back panel by pulling out at the bottom, then once all the clips have popped out pull up for the top clips to release. Next remove the driver side floor mount, then pull out the driver side panel. It doesn't have to c...